Diptrace pattern editor tutorial8/11/2023 ![]() If you don't have schematic simbol you have to draw it in component editor ![]() Just a quick tips how to attach your pattern to the schematic ![]() If anything is unclear, ask the questions. Save it and attach from the component editor You can predefine the wide of component's silkscreen, but imo 0.25mm is fine * select "1" and type in X field -6.1 (half the width) and 8.6 in Y field (half the height of the switch) place the square in to the work field over the switch -> right mouse click -> properties Well almost - you can add the square simbol with switch's outter diameter for silkscreening. It's more less personal choice when it comes to the pad size, but try to make the sizo of the hole bit bigger than 0.8mm.Ĭlick ok, and ok, and that's all. * you can define all the pad properties like the shape, wide of the pad, hole dimension or it's shape. you can predefine spec of the pads in "type / dimensions" -> "pattern's pad properties." right click mouse and go to "properties" * "refdes" - if it's a switch type SW, if resistor - R, capacitor - C - you get the idea. * "name" - give it a name like DPDT pcb, mini dpdt or whatever * next two fields "pad spacing" and "line spacing" you typing spacing/dimensions from your datasheet (7.1mm (?) and 7.1mm in this case) in the work field you have a manu titteled "pattern properties" have technical sheet of your switch in hand launch diptrace, you see the starting menu - choose pattern editor So, I'm not sure how advanced you are in those things, but I'm assuming that you know you need both schematic simbol as well as the pattern
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |